Posts tagged: Blog Post

What Is The Difference Between Slow/Medium/Fast Action Fly Rods?

What Is The Difference Between Slow/Medium/Fast Action Fly Rods?
Written by: Leif Catania
Photos: Josh Thelin

Rod Speed (what a confusing classification). Everyone asks about it in the shop, and unfortunately a fraction of those people have any idea what it means. Usually when purchasing a new fly rod, the three differentiators of fly rods are weight, length, and speed (or action). Weight and length are fairly straight forward, however I’ve found that speed is what will trip people up a lot. The action of a fly rod refers to the speed of a rod, or frankly, how long that rod takes to load.

The industry standard for the east coast right now for the “best all-around trout fly rod” is the 905 (or 9ft, 5wt). Now that categorization fails to account for speed. Depending on the fishing you are doing, if the action of that rod is not suitable, you’re going to likely have a difficult time casting. Kind of renders the whole “best all-around fly rod” obsolete, doesn’t it?

Since that action or speed is very important, my first question to anyone looking at a new rod is, “What type of fishing would you like to do?” So let’s address the various preferred fishing methods for various speeds. It is best to think of rod speed on a spectrum from slow - fast, with “medium” being in the middle. For the sake of this blog, let’s divide them into:

  • Slow
  • Medium
  • Fast

Quick Disclaimer: Rod Action can be very ambiguous between manufacturers. For example, R.L. Winston listed their famous BIIIX as a fast rod, but in comparison to other rods in that “fast” category it is a borderline pool noodle. That is why it is incredibly important to swing by your local fly shop and cast rods and/or ask lots of questions before purchasing.

Fly Rod Action and Speed - What Should I Get

Slow:

Slow rods are the “purist” rods of the industry. Sometimes referred as a mid-flex, their slow gradual taper allows for the rod to flex almost throughout. This creates a very noodle-like rod. While sometimes difficult for casting in windy scenarios, slow rods are an absolute pleasure to cast and are revered for this. Fiberglass and bamboo rods fall under this category, and they’re typically the slowest rods available.

Scenarios: The slow nature of the rod allows for delicate casting and are ideal for softer presentations, but is unable to accommodate heavier rigs. In addition, slower rods are more difficult to cast longer distances. Therefore these types of rods are used almost exclusively for dry fly fishing.

Examples:

Echo River Glass: (https://allpointsflyfishing.com/collections/echo-fly-rods/products/echo-river-glass-fly-rod),

TFO Finesse: (https://allpointsflyfishing.com/collections/fly-rods/products/tfo-finesse-trout-fly-rod)

Medium / Medium-Fast:

Medium Speed Rods find themselves smack dab in the middle of slow and fast. Usually more frequently labeled as “medium fast”. These rods are a combination of a slow rod for pleasant casting and “feel” while also a faster rod to allow for greater distances, wind, or heavier flies/rigs.

Scenarios: Medium Rods are versatile. The combination of the feel of a slow rod with the strength of a fast rod makes them perfect for dries, nymph rigs, and small streamers. This rod will however also have some difficulty with larger streamers, sinking (tip) lines, or nymph rigs with significant weight.

Examples:

Echo Dry Fly Rod: (https://allpointsflyfishing.com/collections/echo-fly-rods/products/echo-dry-fly-rod)

Sage Motive: (https://allpointsflyfishing.com/collections/sage-rods/products/sage-motive-fly-rod)

T&T Zone: (https://allpointsflyfishing.com/collections/thomas-thomas/products/thomas-thomas-zone-fly-rod-1)

Fast:

Fast rods have steep, quick tapers that allow them to only flex in the tip section of the rod. This type of flex allows the rod to load very quickly and accommodate heavier flies or lines. The only draw back with fast rods is they will typically lose some “feel” while casting and can sometimes overpower small flies (which can reduce quality of presentation of dries)

Scenarios: Fast rods are still all-around rods, simply because they can cast anything. Due to their power, these rods excel at casting in windy scenarios or long distances. If you are doing any sort of saltwater or streamer fishing, this speed of rod can be advantageous. Also, if you want to use a heavy sinking line, or “quickshooting” type of tapered line, certainly a fast rod will help as these can sometimes overpower slower rods. Fast rods will also handle nymphing scenarios or a dry-dropper better (big dries are very wind resistant!)

Examples:

Sage X: (https://allpointsflyfishing.com/collections/sage-rods/products/sage-x-fly-rod),

Echo Boost: (https://allpointsflyfishing.com/collections/echo-fly-rods/products/echo-boost-fly-rod)

T&T Exocett: (https://allpointsflyfishing.com/collections/thomas-thomas/products/thomas-thomas-exocett-fly-rod)

TFO BVK (https://allpointsflyfishing.com/collections/fly-rods/products/tfo-bvk-fly-rod)

 

Read more

My Disastrous First Season Fly Fishing For Stripers In Maine And What I Learned...

My Disastrous First Season Fly Fishing For Stripers In Maine And What I Learned...

Hi, I’m a 16-year-old high school student living in Falmouth, Maine. This past summer I decided to try fly fishing for striped bass. I have been fly fishing for trout for around three years and have completely fallen in love with the sport. From the second I caught my first striper on a spinning rod I was eager to chase them on the fly. The fight that a striper gives is incomparable to trout’s fight. I thought my first season was going to be full of these incredible fights. But boy was I wrong. Like it says in the title, my first season fly fishing for stripers was truly a disaster. I caught a whopping total of zero stripers. That’s right...zero.

My goal in this short article is to share my experiences and what I learned from them. By doing so, I hope that you will take something away from this that will help you to avoid making the same mistakes I did.

Here’s what I learned…

1. Cast Cast Cast...

What was probably the biggest adjustment I needed to make when starting to fly fish for stripers was getting used to casting the new setup. Before getting my saltwater rod and line, the only rods I casted were 5wts and 6wts with the appropriate line for each. It was a big change going from light trout rods to a 9wt with the heavy front tapered Rio Coastal Quickshooter line. I knew before I could go out and fish I needed to get some casting in. The first couple casting sessions were tough. I wasn’t getting nearly the distance I should have been getting and I was also getting repeatedly whipped in the back of the neck/head by the thick end of the line, which was not pleasant at all. But the more I casted, the better I got. I was using fewer false casts and getting more distance. I learned from my mistakes and tweaked my technique.

When I finally got in the water, I faced yet another problem with my casting. The line I was using was nothing like the light floating trout line that you can pick up out of the water with a small flick of the wrist. The line sinks and it’s extremely hard to get out of the water without using the correct technique. I had to do several roll casts to flip the fly out of the water. I was then able to cast effectively.

This whole experience taught me that taking time to practice casting can only make you a better fly fisherman/woman. I’m nowhere near an expert caster but I’m getting better and that's all that really matters. So I advise any beginners or just anyone looking to improve their casting to spend some time in their yard or in a calm body of water and just practice.

2. Go Prepared

Being prepared can make or break a good day of fishing. I learned this the hard way during my first season. On my very first outing, I regrettably didn’t bring a stripping basket. For some reason, I didn’t think I needed one. Once again I was horribly wrong. I waded out and got set up for what I hoped was going to be a great day’s fishing. My first cast went a pathetic 15 feet. I was sure my line was caught on something. When I looked down to see what it was caught on I noticed that it wasn’t caught on anything, but was instead sitting underwater next to my feet. I made a couple more casts but I couldn’t shoot any line because it had all sunk to the bottom. It was then when I realized that my first outing was officially over. I sludged back to shore feeling defeated and called my mom to come pick me up.

I learned from this experience that wading out and fly fishing for stripers is nearly impossible without a stripping basket. I decided to attempt to make my own out of a wash bin, hot glue sticks, and paracord. When melting the hot glue sticks to the bottom of the wash bin the adhered section of the hot glue stick was not completely smooth. This ended up causing the line to sometimes get caught, ruining the cast. Yet another fail. Feeling bad for me, my Dad bought me a real stripping basket for the holidays and I can’t wait to give it a go. I advise any saltwater angler who doesn’t already have a stripping basket to learn from my mistake and either make one (which hopefully turns out better than mine) or purchase one.


Another piece of equipment that I realized I should have had during my first season was a good pair of gloves. With all the practice casting in and out on the water, my hand started developing some pretty nasty blisters. At one point the blisters on my hands were so bad that I could barely grip the rod to make a cast. Going prepared with a pair of gloves could have solved this problem. I recently got a pair of the Simms Solarflex Sun Gloves and I can’t wait to try them out this spring. I am sure they will make a big difference.

3. It's A Marathon Not A Sprint

My biggest take away from my first season fly fishing for stripers is that you shouldn’t expect to be an expert immediately, or anything close to it. Learning something new takes time. I made the mistake of thinking that fly fishing for stripers is just like trout fishing and that I’ll go out they and catch fish after fish. I very quickly realized that I was wrong and that I actually really sucked. But honestly, it’s okay to suck because all that matters is that you are out there having fun. And one day if you put in enough time you will realize that you don’t actually suck anymore. Looking back on what a disastrous first season I had, I realize that making mistakes and sucking is all part of the process, and that the more I go out and just fish, the better chance I’ll have of having a great season.

Words + Photo By: Nick Shapiro

Read more